Taiwan Cheng Tung Industrial Co., Ltd
Taiwan Cheng Tung Industrial Co., Ltd builds up in order to produce all kinds of condensers to 1998 establishment of the Republic of China, creat but also better quality principle so far for more than five years and adhere to, with the managing continuously forever of sane steady and sure one point one steps footprint. Main products:Capacitors, Metallized Film Capacitors, Plastic Film Capacitors, Metallized Film Capacitors, AC Motor Start Capacitors, Multilayer Ceramic Capacitors, Aluminum Electrolytic Capacitors, Motor Starting, Varistor, Mini Box Film Capacitors, High Voltage Capacitors, Polyester Film Inductive Capacitors, X1 & X2 Capacitors, X1Y2 Capacitors, AC Motor Capacitors, Film Capacitors, Safety Standard Recognized Ceramic Capacitors, Ceramic Capacitors Manufacturer.

Series RC Units , RC Capacitor (Spark Suppression)

Categories > Film Capacitor > Box Type > RC Capacitor (Spark Suppession) > RC Capacitor (Spark Suppression)

Product Name:

RC Capacitor (Spark Suppression)

Description:

Metallized Polypropylene capacitor and series with resistor, flame retardant plastic

case and epoxy resin seal (UL94V-0).

Outline Drawing：

Features:

There is ability of good anti-pulse
Safety protection function
Integration design makes higher reliability and less assembly

Specification:

․Base specification：

IEC 33(CO)77 A.C.motor capacitors.
JIS C4908 capacitors for electrical apparatus.

․Climatic Category：

In accordance with DIN40040 GPF.
G=Minimum limit temperature：-40℃
P=Maximum limit temperature：+85℃
F=Humidity category：average relative
humidity ≦75%,95% for 30days per year；
continuously,85% for the remaining days；
occasionally.

․Rated Voltage：

250～450V.AC 50/60Hz

․Capacitance Range：

0.1～1.0uF

․Capacitance Tolerance：

K(±10%)

․Withstand Voltage：

(a).Between terminals：1.5 x rated voltage for 10s.
(b).Between terminals and case：2 x rated voltage
+1000V (minimum 1500V) for 60s.
This test occasional self-healing breakdown
are allowed.

․Insulation Resistance：

(a).Between terminals：
≧30x103MΩ for C≦0.33uF.
≧10x103MΩ /uF for C > 0.33uF.
Measured at 100V.DC 60s.and 20℃.
(b).Between terminals and case：≧10x103MΩ.
Measured at 100V.DC 60s.and 20℃.

․Dry Heat Resistance：

In accordance with IEC 68-2-2 test Ba.
Conditions
Test temperature：Maximum limit temperature.
Test duration：16hrs.
Test criteria
(a).Appearance：No visible damage and no leakage.
(b).Capacitance change：≦+2,-5% of the initial
value.
(c).Insulation resistance：≧10% of initial specified
value.

․Cold Resistance：

In accordance with IEC 68-2-1 test Aa.
Conditions
Test temperature：Maximum limit temperature.
Test duration：2hrs.
Test criteria
(a).Appearance：No visible damage.
(b).Capacitance change：≦+3,-1% of the initial
value.

․Humidity Resistance：

In accordance with IEC 68-2-3 test Ca.
Conditions
Test temperature：+40℃
Relative humidity：90 to 95%
Test duration：21day.
Test voltage：(a).Without voltage.
(b).With rated voltage.
Test criteria
(a).Capacitance change：≦±4% of the initial value.
(b).Dissipation factor：≦0.5 x 10-3(0.05%) of
increased value.
(c).Insulation resistance：≧50% of initial specified
value.

․Endurance：

Place the capacitor in the thermostatic oven
in accordance with the condition of following：
Test A：Continuous endurance test.
Test temperature：Maximum limit temperature.
Test voltage：1.25 x rated voltage.
Test duration：1000±12hrs.
Test B：Intermittent endurance test.
Test temperature：Maximum limit temperature.
Test voltage：1.4 x rated voltage.2s. ON 2s.
OFF (15time / min.)
Test cycle(time)：10 x 104
Test criteria
(a).Appearance：No visible damage and no leakage
3
(b).Capacitance change：≦±5% of the initial value.
(c).Dissipation factor：≦0.5 x 10-3(0.05%) of
increased value.
(d).Insulation resistance：≧50% of initial specified
value.

Safety Approval:

Used in the circuits of across-the line-type noise suppression and other AC/DC circuits
Protection of contacts from noise during switching operations of equipment
Electrical noise protection of semiconductor equipment during the control of triacs, thyristors, motors, welders, etc.

This is the detailed information for RC Capacitor (Spark Suppression), Series RC Units. The information includes model, name, description and specification for RC Capacitor (Spark Suppression), Series RC Units.

Related Products :

Categories > Film Capacitor > Box Type > RC Capacitor (Spark Suppession) > (Parallel RC Units) RC Capacitor (Spark Suppression)

Please send your Inquiries for RC Capacitor (Spark Suppression), Series RC Units to us. We will contact you soon. Please also check out the related product categories below.

․Base specification：	IEC 33(CO)77 A.C.motor capacitors. JIS C4908 capacitors for electrical apparatus.
․Climatic Category：	In accordance with DIN40040 GPF. G=Minimum limit temperature：-40℃ P=Maximum limit temperature：+85℃ F=Humidity category：average relative humidity ≦75%,95% for 30days per year； continuously,85% for the remaining days； occasionally.
․Rated Voltage：	250～450V.AC 50/60Hz
․Capacitance Range：	0.1～1.0uF
․Capacitance Tolerance：	K(±10%)
․Withstand Voltage：	(a).Between terminals：1.5 x rated voltage for 10s. (b).Between terminals and case：2 x rated voltage +1000V (minimum 1500V) for 60s. This test occasional self-healing breakdown are allowed.
․Insulation Resistance：	(a).Between terminals： ≧30x103MΩ for C≦0.33uF. ≧10x103MΩ /uF for C > 0.33uF. Measured at 100V.DC 60s.and 20℃. (b).Between terminals and case：≧10x103MΩ. Measured at 100V.DC 60s.and 20℃.
․Dry Heat Resistance：	In accordance with IEC 68-2-2 test Ba. Conditions Test temperature：Maximum limit temperature. Test duration：16hrs. Test criteria (a).Appearance：No visible damage and no leakage. (b).Capacitance change：≦+2,-5% of the initial value. (c).Insulation resistance：≧10% of initial specified value.
․Cold Resistance：	In accordance with IEC 68-2-1 test Aa. Conditions Test temperature：Maximum limit temperature. Test duration：2hrs. Test criteria (a).Appearance：No visible damage. (b).Capacitance change：≦+3,-1% of the initial value.
․Humidity Resistance：	In accordance with IEC 68-2-3 test Ca. Conditions Test temperature：+40℃ Relative humidity：90 to 95% Test duration：21day. Test voltage：(a).Without voltage. (b).With rated voltage. Test criteria (a).Capacitance change：≦±4% of the initial value. (b).Dissipation factor：≦0.5 x 10-3(0.05%) of increased value. (c).Insulation resistance：≧50% of initial specified value.
․Endurance：	Place the capacitor in the thermostatic oven in accordance with the condition of following： Test A：Continuous endurance test. Test temperature：Maximum limit temperature. Test voltage：1.25 x rated voltage. Test duration：1000±12hrs. Test B：Intermittent endurance test. Test temperature：Maximum limit temperature. Test voltage：1.4 x rated voltage.2s. ON 2s. OFF (15time / min.) Test cycle(time)：10 x 104 Test criteria (a).Appearance：No visible damage and no leakage 3 (b).Capacitance change：≦±5% of the initial value. (c).Dissipation factor：≦0.5 x 10-3(0.05%) of increased value. (d).Insulation resistance：≧50% of initial specified value.