Taiwan Cheng Tung Industrial Co., Ltd
For Motor Application , HMP
Categories > Film Capacitor > Box Type > AC MOTOR RUNNING CAPACITOR > HMP
Product Name:
HMP
Description:
AC Metallized Polypropylene Film Capacitors with Plastic Case
HMP are non-inductively wound with metallized Polypropylene film as dielectric/electrode, encapsulated in flame retardant (UL94, V-0) plastic case and epoxy resin end seal.
Features:
* Interference suppressors * Excellent safety mechanisms * Ensures long life * High-moisture and thermostability resistance Diagram of Dimensions (Unit=mm) Part No. Capacitance Rated-Voltage The Plastic Case Dimensions in mm uF VAC W±0.5 H±0.5 T±0.5 P±0.5 D±0.05 HMP333K630VP15 0.033 630 18 13.5 6 15 0.8 HMP564K500VP275 0.56 500 31.5 22.5 13 27.5 0.8 HMP105K450VP275 1.0 450 31.5 25 14 27.5 0.8 HMP103K450VP10 0.01 450 13 11 5 10 0.8 HMP103K450VP15 0.01 450 18 10 5 15 0.8 HMP472K440VP10 0.0047 440 13 11 5 10 0.8 HMP103K440VP15 0.01 440 18 10 5 15 0.8 HMP683K440VP225 0.068 440 25 14.5 6 22.5 0.8 HMP104K440VP225 0.1 440 26.5 16.5 7 22.5 0.8 HMP154K440VP225 0.15 440 26.5 19 10 22.5 0.8 HMP414K440VP225 0.41 440 26.5 19 10 22.5 0.8 HMP474K440VP225 0.47 440 26.5 19 10 22.5 0.8 HMP474K400VP225 0.47 400 26.5 19 10 22.5 0.8 HMP103K400VP10 0.01 400 13 11 5 10 0.8 HMP104K400VP15 0.1 400 17 11 5.5 15 0.8 HMP335K300VP275 3.3 300 31.5 25 14 27.5 0.8 HMP405K250VP275 4 250 31.5 22.5 13 27.5 0.8 HMP505K250VP325 5 250 37 24 13.5 32.5 0.8 HMP805K250VP325 8 250 37 34 22 32.5 0.8 HMP185K250VP225 1.8 250 26.5 19 10 22.5 0.8 HMP154K200VP15 0.15 200 18 10 5 15 0.8.JPG)
Specification:
*Base specification: IEC33 (CO) JIS C4908 capacitors for electrical apparatus *Climatic Category: In accordance with DIN40040 GPF. H=Minimum limit temperature: M=Maximum limit temperature: + F=Humidity category: average relative Humidity≦75%, 95% for 30 days per year; Continuously, 85% for the remaining days; Occasionally. *Rated Voltage: 250, 350, 400, 450 V.AC/60Hz *Capacitance Range:0.1uF to 10uF *Capacitance Tolerance: J (±5﹪), U (+10-5﹪), K (±10﹪) *Withstand Voltage: (a) Between terminals: 1.5 x rated voltage for 10s. (b) Between terminals and case: 2 x rated voltage + 1000V (minimum 1500V) for 60s. This test occasional self-healing breakdown are allowed *Dissipation Factor (tan δ%): ≦1x10-3 (0.1%) at 200V.AC 60Hz and *Insulation Resistance: (a) Between terminals: ≧ 10 x 103 MΩ for C≦1uF ≧ 10 x 103 MΩ for C＞1uF Measured at 100V.DC 60s. and (b) Between terminals and case: ≧ 10 x 103 MΩ Measured at 100V.DC 60s. and *Dry Heat Resistance: In accordance with IEC Test temperature: Maximum limit temperature Test duration: 16 hours Test criteria : (1) Appearance: No visible damage and no leakage (2) Capacitance change: ≦+2, -5﹪of the initial value (3) Insulation resistance: ≧10﹪of initial specified value *Cold Resistance: In accordance with IEC Test temperature: Maximum limit temperature Test duration: 2 hours Test criteria (1) Appearance: No visible damage (2) Capacitance change: ≦ + 3, -1 ﹪of the initial value *Humidity Resistance: In accordance with IEC Test temperature: + Relative humidity: 90 to 95% Test duration: 21 days Test voltage: (a) Without voltage (b) With rated voltage Test criteria (a) Capacitance change: ≦±4% of the initial value (b) Dissipation factor: ≦0.5 x 10-3 (0.05%) of increased value (c) Insulation resistance: ≧50% of initial specified value *Endurance: Place the capacitor in the thermostatic oven in accordance with the condition of following: Test A: Continuous endurance test. Test temperature: Maximum limit temperature Test voltage: 1.25 x rated voltage Test duration: 1000 ± 12 hours Test B: Intermittent endurance test. Test temperature: Maximum limit temperature Test voltage: 1.4 x rated voltage 2s. on 2s. off (15 time/min.) Test cycle (time): 10 x 104 Test criteria (a) Appearance: No visible damage and no leakage (b) Capacitance change: ≦±5% of the initial value (c) Dissipation factor: ≦0.5 x 10-3 (0.05%) of increased value (d) Insulation resistance: ≧50% of initial specified value *Solderability: In accordance with IEC Wave soldering: Method 1 (only of wire terminals) conditions Solder bath temperature: 235± Solder time: 2±0.5s. Capacitor body may lie on printed circuit board Hand soldering: Method 2 (only of tag terminals) conditions Solder iron temperature: 350± Solder time: 10±2s. Test criteria No damage and good tinning *Soldering Heat Resistance: In accordance with IEC Wave soldering: Method Solder bath temperature: 260± Solder time: 5±1s. Capacitor body may lie on printed circuit board Hand soldering: Method Solder iron temperature: 350± Solder time: 10±2s. Test criteria (a) Appearance: No damage (b) Capacitance change: ≦+3% of the initial value *Vibration Resistance: In accordance with IEC Frequency range: 10 to 55 Hz Conforming to max: Test criteria (a) Appearance: No visible damage (b) Capacitance change: ≦+2% of the initial value *Tensile Strength Terminals: In accordance with IEC Load force and holding times: Sectional area mm2 or (Dia mm) Load force Kg (N) Holding times S. ≧0.07 to ≦0.2 (≧0.3 to ≦0.5) 0.5 (5) 10 ＞0.2 to ≦0.5 (＞0.5 to ≦0.8) 1.0 (10) 10 ＞0.5 to ≦1.0 (＞0.8 to ≦1.2) 2.5 (25) 20 ＞1.0 (＞1.2) 4.5 (45) 20 Test criteria No wire (tag) breakage and no damage of capacitor *Bending of Terminals: In accordance with IEC Load force: Bending times: Two consecutive bends (4 x 90°) Test criteria No wire (tag) breakage and no damage of capacitor *Marking: Capacitor marked with type identification capacitance Capacitance tolerance, rated voltage, name or code of Manufacturer and date of manufacture
Safety Approval:
* Motor Run – ideal for various motor applications in washing machine, air conditioner, electric water pump, power factor collection. * By connecting the capacitor in series with the starting winding motor, allow motors with two or three windings to function on a single-phase supply.
This is the detailed information for HMP, For Motor Application. The information includes model, name, description and specification for HMP, For Motor Application.
Please send your Inquiries for HMP, For Motor Application to us. We will contact you soon. Please also check out the related product categories below.